home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 2: CDPD 1
/
Almathera Ten on Ten - Disc 2: CDPD 1.iso
/
pd
/
076-100
/
079
/
auxhandler
/
newchanges
< prev
next >
Wrap
Text File
|
1995-03-13
|
3KB
|
92 lines
Article 4582 of comp.sys.amiga:
Path: mcdsun!noao!hao!gatech!rutgers!sri-spam!ames!ucbcad!ucbvax!decvax!decwrl!cgfsv1.dec.com!drew
From: drew@cgfsv1.dec.com (Steve Drew)
Newsgroups: comp.sys.amiga
Subject: Notes on AUX: handler, Emacs.
Message-ID: <9846@decwrl.DEC.COM>
Date: 13 May 87 00:08:09 GMT
Sender: daemon@decwrl.DEC.COM
Organization: Digital Equipment Corporation
Lines: 78
Heres a couple of notes for those with manx 3.4a in regards to
my aux-handler:
Making AUX HANDLER shrink from 5736 bytes to approx 4450 bytes:
---------------------------------------------------------------
One thing I meant to do before posting my Aux-handler was to remove
the Large Code/Date switches. I had compiled this way while debugging just
to play it safe. Anyway I tried it now with-out +C +D and the executable
shrinks from 5736 bytes to 4344 bytes. (Link with c32.lib instead of cl32.lib)
(This is all with manx 3.4a.)
Small (minor) Bug fix:
----------------------
Problem: Handler eats up ^C in RAW mode when it should'nt.
Fix: add the line in read_ser() that's indicated below:
if (c == 3) { /* ^C typed so immediately send the signal */
==> if (!(aux_stat & AUX_RAW))
c = 0;
if (reader)
Signal(reader,SIGBREAKF_CTRL_C);
}
PATCH TO MAKE MicroEmacs 3.x run through AUX:
---------------------------------------------
(This was even easier than I thought it would be!)
Just add the indicated lines below (=>) to the 'termio.c' module and
recompile.
What it does: When invoked emacs will now only open a RAW window if 'Run',
if you just invoke emacs eg: '1> emacs file' from it will change the console
to RAW mode and use that. Since my aux-handler supports RAW mode it works
the same way to a ansi (vt100) style terminal.
ttopen()
{
#if AMIGA
=> extern int Enable_Abort;
=>
=> Enable_Abort = 0;
=> if (IsInteractive(Input()) && IsInteractive(Output())) {
=> terminal = (long)Output();
=> set_raw();
=> }
=> else
terminal = Open("RAW:0/0/640/200/MicroEMACS 3.8b", NEW);
#endif
ttclose()
{
#if AMIGA
amg_flush();
=> if (Output() != terminal)
Close(terminal);
=> else
=> set_con();
#endif
Ok, so now we can dail up, use shell, emacs a file, compile it, hummm...
all we need now it a mini kermit server. (And a hard drive, sniff)
/Steve.
============================================================================
Steve Drew at ENET: CGFSV1::DREW
ARPA: drew%cfgsv1.dec.com@decwrl.dec.com
USENET: {decvax!decwrl}!cgfsv1.dec.com!drew
============================================================================